[Linux-disciples] SMART errors

Adam Rosi-Kessel adam at rosi-kessel.org
Wed Oct 27 11:01:20 EDT 2004


Seems to me that your device to does not support SMART.  These results
are not useful.  Maybe do some research on your particular make/model and
see what it says about SMART logging.

On Wed, Oct 27, 2004 at 10:54:11AM -0400, Stephen R Laniel wrote:
> I find SMART errors pretty inscrutable. I just got one last
> night, so I did 'smartctl -a /dev/hda' and got the messages
> below. Can someone translate for me? Is this something I
> need to worry about?
> 
> -----
> smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> === START OF INFORMATION SECTION ===
> Device Model:     QUANTUM FIREBALL CR13.0A
> Serial Number:    121905516512
> Firmware Version: A5U.1200
> Device is:        Not in smartctl database [for details use: -P showall]
> ATA Version is:   4
> ATA Standard is:  ATA/ATAPI-4 T13 1153D revision 15
> Local Time is:    Wed Oct 27 09:59:35 2004 EDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> 
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> 
> General SMART Values:
> Offline data collection status:  (0x80)	Offline data collection activity
> 					was never started.
> 					Auto Offline Data Collection: Enabled.
> Self-test execution status:      (   0)	The previous self-test routine completed
> 					without error or no self-test has ever 
> 					been run.
> Total time to complete Offline 
> data collection: 		 (   2) seconds.
> Offline data collection
> capabilities: 			 (0x1b) SMART execute Offline immediate.
> 					Auto Offline data collection on/off support.
> 					Suspend Offline collection upon new
> 					command.
> 					Offline surface scan supported.
> 					Self-test supported.
> 					No Conveyance Self-test supported.
> 					No Selective Self-test supported.
> SMART capabilities:            (0x0003)	Saves SMART data before entering
> 					power-saving mode.
> 					Supports SMART auto save timer.
> Error logging capability:        (0x01)	Error logging supported.
> 					No General Purpose Logging support.
> Short self-test routine 
> recommended polling time: 	 (   2) minutes.
> Extended self-test routine
> recommended polling time: 	 (  21) minutes.
> 
> SMART Attributes Data Structure revision number: 9
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x0029   100   253   020    Pre-fail  Offline      -       0
>   3 Spin_Up_Time            0x0027   079   070   020    Pre-fail  Always       -       2698
>   4 Start_Stop_Count        0x0032   100   100   008    Old_age   Always       -       639
>   5 Reallocated_Sector_Ct   0x0033   100   100   020    Pre-fail  Always       -       0
>   7 Seek_Error_Rate         0x000b   100   100   023    Pre-fail  Always       -       0
>   9 Power_On_Hours          0x0012   078   078   001    Old_age   Always       -       15069
>  11 Calibration_Retry_Count 0x0013   100   100   020    Pre-fail  Always       -       0
>  12 Power_Cycle_Count       0x0032   100   100   008    Old_age   Always       -       635
>  13 Read_Soft_Error_Rate    0x000b   100   100   023    Pre-fail  Always       -       0
> 199 UDMA_CRC_Error_Count    0x001a   200   200   000    Old_age   Always       -       0
> 198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
> 
> SMART Error Log Version: 1
> No Errors Logged
> 
> SMART Self-test log structure revision number 1
> Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
> # 1  Vendor offline      Fatal or unknown error        100%         1         2566914352
> # 2  Reserved offline    Fatal or unknown error        100%         1         1979711802
> # 3  Reserved offline    Fatal or unknown error        90%         1         3556770361
> # 4  Reserved offline    Fatal or unknown error        90%         1         1526726969
> # 5  Reserved offline    Fatal or unknown error        80%         1         3825205560
> # 6  Reserved offline    Fatal or unknown error        80%         1         1828716856
> # 7  Vendor offline      Fatal or unknown error        70%         1         3741319735
> # 8  Reserved offline    Fatal or unknown error        70%         1         1711276343
> # 9  Reserved offline    Fatal or unknown error        60%         1         4009754934
> #10  Vendor offline      Fatal or unknown error        60%         1         2013266230
> #11  Vendor offline      Fatal or unknown error        50%         1         3925869109
> #12  Vendor offline      Fatal or unknown error        50%         1         1895825717
> #13  Vendor offline      Fatal or unknown error        40%         1         4194304308
> #14  Vendor offline      Fatal or unknown error        40%         1         2197815604
> #15  Vendor offline      Fatal or unknown error        30%         1         4110418483
> #16  Vendor offline      Fatal or unknown error        30%         1         2080375091
> #17  Vendor offline      Fatal or unknown error        20%         1         100663602
> #18  Vendor offline      Fatal or unknown error        20%         1         2382364978
> #19  Vendor offline      Fatal or unknown error        10%         1         561
> #20  Vendor offline      Fatal or unknown error        10%         1         2281701681
> #21  Vendor offline      Fatal or unknown error        00%         1         268435760
> 
> Device does not support Selective Self Tests/Logging
-- 
Adam Rosi-Kessel
http://adam.rosi-kessel.org


More information about the Linux-disciples mailing list